News
72 watt P.O.E. transformer
LinkCom 6821 launched a 72w PoE PD DC/DC transformer, the size is (length * width * height = 26.0 * 31.5 * 14.5mm), applied to the original 60w IEEE 802.3bt Ethernet power supply (PoE), type3 design, will have better temperature characteristics.
Large wattage P.O.E. transformers
LinkCom 6821 has launched a 90w PoE PD DC/DC transformer with dimensions (L*W*H= 31.5*40*14.5mm) that can support the maximum power of the IEEE 802.3bt Power over Ethernet (PoE) standard.
Medium to high power wireless charging coil
LinkCom 6821 launched a new wireless power coil that passed customer functional testing, designed for medium and high power wireless charging, and supports AGV, Ebike and other applications. It brings higher charging efficiency and distance for medium and high power wireless charging, which is widely loved by distribution partners and users.
High-power advanced calibration inductors
LinkCom (6821) has made a new breakthrough in the development of automotive magnetic components, and the current power correction inductor (On Board Charger PFC Choke) for OBC has been upgraded from the current 11KW to 50KW, leading the industry, and the module body has been further reduced to 86mm long, 62mm, and 52mm high.
TLVR Inductors for Server V-Core
Linkcom (TPE, 6821), which has been deeply involved in magnetic components for more than 30 years, recently launched a new TLVR inductor for the server market. Starter product LVR1206 series efficient better than competitor 1%.
BLE Wall switch (6 buttons type)
LinkCom （TPE,6821）, which has been occupying a place in the commercial lighting market for a long time, recently launched a new INCORE smart touch panel (WS101), which locks the AC power supply units that have been laid in large quantities and provides the best upgrade solution.
Small size 100A LLC choke
LinkCom (6821.TW) low profile 100A LLC choke with 45mm long, 44.5mm wide, 42.5mm high.
Different from usual process, this product is wound automatically with flat wire, instead of round magnet wire. Winding with flat wire not only increases the winding area but also lower the effect of parasitic capacitance which uses litz wire. Also, compare with Mn-Zn and Ni-Zn ferrite, it uses a material called Fe-Si, which enormously lower the effect of saturated current.
This choke is designed for DC fast charger on EV application.
Current Sensor for home energy monitoring
LinkCom(6821.TWO) clamping current sense transformer LCS0065-50 is successfully approved by IoT system company.
Low Profile 60A PFC Choke
LinkCom (6821.TW) low profile 60A PFC choke with 52.5mm long, 50mm wide, 52.5mm high.
Different from usual process, this product is wound automatically with flat wire, instead of round wire.
50kW Full Bridge DC to DC Transformer
Linkcom (6821) has launched a new 50kW full-bridge DC-to-DC transformer for automotive customers, with a body length of 235mm*width of 73mm*height of 94mm.
The new product is used in the electric vehicle charging system, and adopts a new design to replace the traditional enameled wire and retaining wall structure, effectively increasing the window area utilization rate, reducing the overall volume, and the new design structure helps the overall heat dissipation.
Flat panel transformer LPD Series
Linkcom (TPE 6821) launched new LPD series flat panel transformer. This is the first time in the industry to introduce a PCB assembly process in the PoE Power over Ethernet). In traditional PoE application s, 50W~100W power transformers generally use traditional EFD20~EFD25 iron cores and bobbin , which causes the transformer unit too large that run in the opposite with current product trend .
High power PoE transformer
Power over Ethernet , or PoE , describes the technology that pass electric power along with data on twisted pair Ethernet cabling.
PoE technology enables to provide power to devices such as VoIP phone, a ccess Points , and IP cameras As the development of PoE technology, LinkCom and world’s leading IC manufacturers , Texas Instruments and Silicon Labs co develop higher power
applications to meet powered devices(PD) needs.